Shop Gear

The quintessential bikepacking bag for the great outdoors. Perfect for bikepacking trips in the wilderness and carrying layers for all-day rides. Designed to hold light, compressible clothes and gear on off-road rides, the seat bag provides a spacious compartment under the saddle, eliminating the need for a rear rack. It's held securely by a stable three-point attachment system, ensuring maximum comfort and dropper post compatibility. The all-weather fabrics offer unparalleled resistance to abrasion and tears, and it's also simple to pack down. - Abrasion-resistant panels for protection - Roll-down closure for adjustable capacity - Reinforced structure for increased riding stability - Reflective graphics and light attachment point for increased visibility - Hard-wearing, all-weather Dimension-Polyant VX21 - Compatible with dropper posts when using adapter - 377g

Includes all hydraulic seals to perform a complete cartridge rebuild of your BikeYoke dropper post. Compatible with: DIVINE

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: ZS56/40/H4/K • Bottom Type: ZS - ZeroStack • Bottom Head Tube Inside Dia.: 55.95mm • Crown Race Seat Dia.: 39.79mm • Crown Race Type: Steel, Face-Sealed • Bottom Stack Height: 4mm • Bottom Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 65g

ABI Headset Bearing for new builds or replacements.

ABI Headset Bearing for new builds or replacements.

- For Integrated Handlebar (one piece) bar/stem - Pro level mount with -7 degree articulation for custom computer positioning - CNC Machined - WAHOO approved and compatible to all Wahoo cycling computers - M5 hardware included. If a smaller bolt is required, use an 8.4mm washer to ensure a secure fit - Compatibility: Most Canyon integrated handlebar-stem systems (not compatible with Canyon H36) - Not combo compatible - Mount Weight: 42g

KS Dropper Post Service Parts

NEW: Please refer to our table graphic in the images for the correct adapter size you need. CNC machined from 6061 T6511 aluminum. Machined surfaces allow for better caliper alignment and a more rigid brake setup. The Post Mount standard is universal for front and rear brakes. Frames and forks that use the post-mount brake interface use a stock size varying from 160mm to 203mm. It’s important to check your frame and fork for the default post mount size before ordering a suitable adapter. To calculate the size of the required adapter, subtract the frame/fork stock mount size from the desired rotor size. If you’re using brakes with large calipers (Magura MT5/MT7, Hope Tech V4, Hayes Dominion A4 etc.), please also order a low profile (button head) bolt kit to ensure correct fitment. Our disc brake adapters do not come with mounting bolts but if needed, we have sets of 4 bolts available. ?Not currently compatible with TRP 203mm rotors.

- 100% reflective material (CE EN 20471 certified) - Breathability: 10,000+gm/24hr - Waterproofing: 10,000mm - Seam-sealed (for sewing line waterproofing) - Fleece-lined collar - Raglan sleeves - Inside chest and back pockets - Low profiled rear spray guard - Inside mesh for added comfort - Built in air vents: front/sides/back - Adjustable waistband and cuffs - Waterproof storm zips with garage - Approximate weight (size variable): 400g - Machine washable - Zip pulls

Compatible with all Presta pump heads and most sealant injectors, Fillmore is backward-compatible with whatever you got, and forward-thinking in every way. Made for mountain, gravel and 'cross rims up to 28mm deep, Fillmore is one of those upgrades you don't know you need until you try it. - Airflow - 3 times standard Presta air flow, easing tubeless tire set-up and reducing pumping force - No clogging - Patented poppet-style design eliminates clogging by shielding air hole from contact with sealant - Simplicity - Ability to inject sealant without removal of valve core simplifies maintenance - Adjustable - Micro-air adjustment feature allows for precise trail-side pressure changes

- Protects high risk areas of the fork from rock chips, wear & scratches - Fits all makes, models and sizes - Designed for maximum coverage with minimal trimming - Designed around mountain bike fork geometry - Fork coverage ~60%. Includes crowns, lowers, and extra pieces - Easy install and high durability - Each kit includes installation instructions, cleaning wipe, squeegee, install solution & microfibre cloth - Self-healing. Minor marks and scuffs will disappear with the warmth of a sunny day - A low surface energy means that less dirt sticks to your bike and is easier to clean - 10 year warranty against discoloration and cracking - Available in either matte or gloss finish to match factory paint and is nearly invisible once installed

- Protects high risk areas from rock chips, wear & scratches - Designed around road and gravel bike geometry - Fits all makes, models and sizes - Designed for maximum coverage with minimal trimming - Frame coverage ~60%. Includes toptube, full downtube, 4 stays, seat tube and extra pieces - Easy install and high durability - Each kit includes installation instructions, cleaning wipe, squeegee, install solution & microfibre cloth - Self-healing. Minor marks and scuffs will disappear with the warmth of a sunny day - A low surface energy means that less dirt sticks to your bike and is easier to clean - 10 year warranty against discoloration and cracking - Available in either matte or gloss finish to match factory paint and is nearly invisible once installed

An additional bag for the cockpit of your bicycle. Fitting securely to the Handlebar Bag using our 'Fast-Fix' strap system, it has a wide zip for convenient access to gear more often needed. This bag can also be used solo, for single-day rides. - 'Fast-Fix' straps allows secure fixing to the HANDLEBAR BAG, but also directly to the handlebars. - Large reflective area. - Full welded construction. - Lightweight TPU- / PU-Coated 420D nylon material. - Wide opening with TPU-coated YKK zip and zip cover. - Internal front pocket.

Perfect for holding lightweight but bulky items, usually these bags are very difficult to remove and attach. We solve this problem with our 'Fast-Fix' strap system, and use the same system for the option of affixing the ACCESSORY POUCH. - 'Fast-Fix' straps allow fast and secure fixing to the handlebars and head tube. - Large reflective areas. - Full welded construction. - Lightweight TPU- / PU-Coated 420D nylon material. - Hidden air removal valve. - Easy-open buckles.

A set of waterproof roll top sacks for extra protection of your gear or safety organize your packing. - Lightweight but strong TPU- / PU-Coated 70D Ripstop - Full welded construction. - Easy-open buckle.

- Comfortable ride - Classic colors

The first saddle designed specifically for the eBike, combining the advantages of 3D Skingel technology with a functional design to guarantee greater comfort, safety and control.

Shimano's Deore XT Shadow Rear Derailleur is perfect for today's aggressive, all-mountain riding. The radical design means that the Shadow is super-low profile; it barely protrudes more than the quick release nut. Direct cable routing reduces the chance of the cable snagging on roots and rocks and fires off shifts super quick. A stronger spring keeps the body more stable when blasting through technical terrain at speed and yields a firm, crisp shifting feel. Plus, the redesigned bracket axle keeps the derailleur body from contacting your chainstay and reduces chatter so you just concentrate on the best line.

- Create an air tight seal for BST rims - Can also be used as a lightweight rim strip for any rim

- Lightweight Design - Steel rings with engineering polymer spacers - Nickel finish - 8 Speed compatible - Weight—346g

Bar end plugs are vital for any bike. The new Wolf Tooth Alloy Bar End Plugs feature a machined 6061-T6 aluminum end cap, a bolt, and an expandable plastic nut to comprise a lightweight, secure bar end plug option. - Available in eight colors that match existing anodized Wolf Tooth headsets, seatpost clamps, chainring bolts, and more - It is compatible with drop bars and MTB bars.

- Customize your ride with WolfTooth's anodized aluminum Bling kits - Extremely lightweight - Includes 3mm, 5mm, 10mm, and 15mm headset spacers, stem cap with integrated 5mm spacer, and 4 color-matching alloy bottle cage bolts - Also includes black top cap alloy bolt - Made from 6061-T6 aluminum

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240s Shim Ring

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings

The buyer's choice for wheel builders looking to save weight. ProLock nipples contain a special adhesive compound (by Loctite) which is activated when a spoke is threaded into the nipple, forming a durable bond. - 32 nipples weigh approximately 30 grams

RaceFace Crank Arm Fixing Bolts - M15

The buyer's choice for wheel builders looking to save weight. ProLock nipples contain a special adhesive compound (by Loctite) which is activated when a spoke is threaded into the nipple, forming a durable bond. - Weight: starting at 20g for 64 nipples

- Aheadset preload adjusting bolt

Replacement small parts for Hope disc brake Hope disc brake calipers.

Hope Brake Lever Parts